8
4.
Device Assembly and disassembly
1). Unscrew the two screw shown to remove the back shell of the base.
2).
After removing the screw, pull at the back shell of the base according to the picture shows, and remove the back
shell of the base.
3).
Remove the two connectors shown in the picture and protect them with the tape according to the picture shows
(to prevent the connector from being pulled out in the process of dismantling and threading); for device with OLED
customer display, can directly pull out the OLED customer display line.
4).Rotate the main screen and the secondary screen : to the vertical angle, remove the three screws of the main