12
ENGLISH
Shortcuts Instructions
Selecting the input source
The first time you turn on your TV, you must select the TV
signal source. Your TV stores this information, so you do not
need to
change the TV signal source unless it changes. For
example, you change from an outside antenna to cable TV.
To select the input source:
1. Turn on your TV, then press the
[INPUT]
button on the remote. The Input source menu appears.
2. Press
[ / ]
button to highlight the input source, then press
[OK]
button.
Changing Channels / Volume
1. Press the
[CH
+
/ -]
on the remote control to change the channel.
2. Press the
[VOL + / -]
on the remote control to adjust the volume.
3. Press the numeric buttons on the remote control to display the corresponding channels.
NOTE
• Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the
remote control. If you are entering two or three digit
channel numbers, the time between key presses should be
less than 3
seconds.
Channel search guide
When you select TV as input, if no TV channels were saved before, you will be prompted to do a channel search.
Shortcuts Instructions
PICTURE
Press to set the picture mode. It can be set as Energy Saving, Movie, Game, Sport, User, Vivid and Standard, This mode achieves a
certain image display effect by setting the brightness, contrast and color etc.
SOUND
Press to set the sound mode. It can be set as Standard, Theater, Music, Speech, Late Night and User.
MUTE
Press to turn the sound off, press this button again to turn the sound back on. This function is used to switch off sound
temporarily.
SLEEP
It can set the TV to let it enter into the Standby state automatically. Press this button repeatedly to select the proper sleeping
clock mode, and the clock tells you the remaining time before the TV enters Standby state.
ASPECT
Select the screen aspect ratio from Wide, Auto, Normal, Zoom, Cinema, Panoramic,1:1 PIXEL MAP and Direct.
NOTE
• The aspect ratio varies with different sources.
