32
Service Guide
Display
Procedures
press <Prg> to main menu, press Down button to Parameter, Press Enter
button,
Press Enter and 0 will flash, press Down button to the correct figure, press
Enter to confirm.
Likewise, change the other 3 figure .After 4 correct figure are inputted,
It will enter Service level parameter.
Press Enter button, It display controller version information.
Press Down button, it goes to Unit type setting.
Press Enter to confirm,
when heating is flashing, press Up or Down button to change the
value.
Press Enter to confirm.
Cursor will move to E02
When E02 is flashing, press Down button to next parameters.
Or, continuously press <Esc> to exit out of the current level and back to the desired menu level.
Access Service Level Parameter data
0000
Enter password
CNHISmVAIE
Ver. :
1.0.7
2015/03/10
E01
Information
SF01:Unit type
Heating
E02
