31
User Guide
Important safety information for end
users
Installation and service works of the heat pump should
only be done by authorized installer and after sales
people.
Do not let children to play the heat pump .
Under some conditions, the heat pump will need
defrosting. Ice on the evaporator will be melt and a
short cloud of condensation from the heat pump will
come out. The surface below the heat pump will be wet
due to the drained water from evaporator.
Do not attempt to modify, repair or service the
appliance yourself.
Do not insert body parts or any other items into the air
inlet or air outlet.
Do not start or stop the unit by removing the power
cable; always use the controls and switches provided.
Do not operate the unit or controller with wet fingers.
Upon replacement of the fuse, ensure an adequate
replacement is used (e.g. not fuse wire).
The electrical supply must be isolated during a
heightened risk of lightning strikes.
Do not attempt to move the appliance once installed;
this must be carried out by a qualified engineer.
Isolate the electrical supply to the appliance if an odour
presents, or scorching is detected.
Only use this appliance for the purpose intended.
Ensure the area around the appliance is clean, well-
ventilated and kept free of all obstructions.
Do not keep items on top of the appliance or use it to
support other appliances.
Do not under any circumstances stand on the appliance.
Drain the water from the water circuit if power to the
unit is to be switched off during very cold weather.
Periodically check the condition of any supports for
deterioration.
Do not wash the unit with water, alcohol, benzine,
thinners, glass cleaner, polish or powders.
During cleaning, isolate the electrical supply to the
appliance.
