Installation Instructions
8
ML19H User Manual, 99154B, November 2022
Step 2: Bench-test Configuration
Make sure everything works before installing into the production environment.
TIP!
If using a KVM extender, please refer to the installation instructions included
with the KVM extender module. It is particularly important to bench-test the full
configuration prior to final installation. This will help to identify and troubleshoot
any system issues while configuration changes may still be easily made.
Connect Video and Power Cables
All monitors are shipped with a standard VGA video cable� AC-powered displays are also
shipped with a power/mains cable� The cable ports are located on the rear of the monitor�
DVI VIDEO
USB
(for Touch Screen option)
SERIAL
(RS-232)
POWER INPUT
VGA VIDEO
Video Connection
The HIS-ML19 supports digital signals (DVI, HDMI, DisplayPort) through its DVI-D port and
analog signals (VGA, RGB) through its VGA port. RGB (BNC, RCA), HDMI, and DisplayPort
video sources require additional adapters�
After selecting the appropriate interface, connect one end of your video cable to the input port
on the rear of the monitor� Secure the screw locks to ensure adequate strain relief� Connect the
other end to the appropriate port on your host computer or other video source�
HAZ
LOC
NOTE: If this step is not performed, the product will not comply with Class I,
II, III, Division 2 Hazardous Location requirements.
