manualshive.com logo in svg

HIS HIS-ML12 E Series, User Manual, Page: 13 / 32

Share
Download
HIS HIS-ML12 E Series User Manual Download Page 13

Installation Instructions

ML12E User Manual, 99151B, September 2021 

 13

3� 

Cut a rectangular hole in the panel.

 

f

Cutout Dimensions (W x H) for the HIS-ML12:
307.8 mm x 262.9 mm (12.12" x 10.35"); ± 0.5 mm (0.020")

4�  Clean and deburr the panel hole�

5� 

Separate the rear collar from the monitor by removing the 8 nuts.

6� 

Refer to the enclosure mounting diagram below.

7�  Insert the unit into the front of the panel and re-attach the collar�

NOTE:

  Contact Hope Industrial Systems if for any reason your application does 

not allow for installation of the collar�

8� 

Tighten all 8 nuts to a torque of 10-15 inch-pounds to ensure a watertight seal 

between the bezel gasket on the monitor and the equipment panel.  Go around all 

nuts twice to ensure an even compression on gasket.

NOTE:

  If a torque wrench is not available, tighten all nuts evenly until bezel sits 

1.6 to 2.4 mm (1/16" to 3/32") off the front of the panel.

Summary of Contents for HIS-ML12 E Series

































Reviews:

No comments