Hirschmann RSPE30, User Manual

Page: 39 / 74

Installation RSPE30/32/35/37
Release 16 04/2019
39
2.3 Mounting a cover panel or a media module
Hirschmann supplies the RSPE30/32/35/37 device with unused, uncovered
media module slots.
2.3.1 Mounting a cover panel
If you do not use media modules, seal the media module slots with cover
panels to keep the degree of protection; you obtain cover panels as an
accessory.
See “Accessories” on page 69.
Proceed as follows:

Place the cover panel onto the media module slot of the device.

Fasten the cover panel to the device by tightening the 2 screws.
2.3.2 Mounting a media module
Hirschmann supplies the media modules ready for operation.
The media modules provide restricted hot-swap-capability. You have the
option of mounting the media modules while the device is operating. To start
the operation, it is necessary to restart the device.
Proceed as follows:

Remove the cover panel (if mounted) from the media module slot on the
device.

Insert the media module into the slot on the device.

Fasten the media module to the device by tightening the 2 screws.

Restart the device.
2.4 Installing and grounding the device
WARNING
FIRE HAZARD
Install the device in a fire enclosure according to EN 60950-1.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.