Installation RSPE30/32/35/37
Release 16 04/2019
29
You find these manuals as PDF files on the Internet at
http://
www.doc.hirschmann.com
1.5.1
10/100 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The port casing is electrically connected to the front panel.
1.5.2
Gigabit combo port
The RSPE30/32/35/37 device provides 4 combo ports for transmission
speeds of up to 1000 Mbit/s.
See table 6 on page 28.
You have the option of alternatively connecting a twisted pair cable via a
RJ45 socket or an optical fiber via a SFP transceiver to a combo port.
You obtain appropriate SFP transceivers as an accessory.
See “Accessories” on page 69.
By inserting a SFP transceiver, you deactivate automatically the
corresponding twisted pair interface.
10/100/1000 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100/1000 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX/
1000BASE-T standard.
Pin
Function
1
RD+
Receive path
2
RD
−
Receive path
3
TD+
Transmission path
6
TD
−
Transmission path
4,5,7,8
—
Table 7:
Pin assignment 10/100 Mbit/s twisted pair port, RJ45 socket, MDI-X mode
1
2
3
4
5
6
7
8
Summary of Contents for RSPE30
Page 73: ...Installation RSPE30 32 35 37 Release 16 04 2019 73...
Page 74: ......
