Hirschmann PowerLION-24TP, Installation Manual

Page: 27 / 78

Features and Benefits
1-7
1
Extender Module LEDs
The optional slide-in module supports its own integrated LED indicators on the
module panel. The following table describes the LEDs.
Features and Benefits
Connectivity
• 24 10/100/1000 Mbps ports for easy Gigabit Ethernet integration and for
protection of your investment in legacy LAN equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the optimum
communication mode (half or full duplex) if this feature is supported by the
attached device; otherwise the port can be configured manually.
• RJ-45 10/100/1000BASE-T ports with auto MDI/MDI-X pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for
10 Mbps connections, Category 5 or better for 100 Mbps connections, and
Category 5, 5e, or 6 for 1000 Mbps connections.
• IEEE 802.3-2002 Ethernet, Fast Ethernet, Gigabit Ethernet, and IEEE 802.3ae
10 Gigabit Ethernet compliance ensures compatibility with standards-based hubs,
network cards and switches from any vendor.
• Provides stacking capability via high-speed serial ports with 40 Gbps stacking
bandwidth. Up to 8 units can be stacked together.
Expandability
• Supports 1000BASE-SX, 1000BASE-LX, and 1000BASE-LH SFP transceivers.
• Optional single-port 10GBASE expansion module with a Xenpak transceiver slot.
Table 1-3 Module LEDs
LED Condition Status
Link/Activity
On/Flashing Green Port has a valid link at 10 Gbps. Flashing indicates activity.
Off
There is no traffic passing through the port.
Diag
Flashing Green System self-diagnostic test in progress.
Green System self-diagnostic test successfully completed.
Amber System self-diagnostic test has detected a fault.