Hirschmann PowerLION-24TP, Installation Manual

Page: 25 / 78

Description of Hardware
1-5
1
Figure 1-4 System LEDs
Table 1-2 System Status LEDs
LED Condition Status
Power Green Internal Power is operating normally.
Amber Internal Power supply fault.
Off Power off or failure.
Diag Flashing Green System self-diagnostic test in progress.
Green System self-diagnostic test successfully completed.
Amber System self-diagnostic test has detected a fault.
RPU Green Redundant power unit is receiving power.
Amber Fault in redundant power unit.
Off Redundant power unit is off.
Stack Master Green Switch is operating as the Master unit in the stack.
Amber Switch is operating as a Slave unit in the stack.
Flashing Amber System in arbitration/election state.
Off System in standalone mode.
Stack Link Green Uplink and downlink operating normally.
Flashing Green Uplink has failed.
Flashing Amber Downlink has failed.
Off No stacking link present.
Module Green An expansion module is installed in the slot.
Flashing green An installed expansion module has been disabled.
Off There is no module installed.
Stack ID 1-8 Indicates the switch stack ID.
The Master unit is numbered 1.
Slave units are numbered 2-8.
Off In standalone mode.
Master
Select
St ack ID
Powe r
RPU
Diag
Module
St ac k Maste r
St ack Link
45 46 47 48
Consol e
System St atus LED s