3
z
Warning!
Failure to observe the information
given in the warnings could result in
serious injury and/or major damage.
Only personnel that have received
appropriate training should operate
this device or work in its immediate
vicinity. The personnel must be fully
familiar with all of the warnings and
maintenance measures in these
operating instructions.
Correct transport, storage, and
assembly as well as careful operati-
on and maintenance are essential in
ensuring safe and reliable operation
of this device.
Use only undamaged parts!
䡺
These products are only to be used in
the manner indicated in this version of the
”Description and Operating Instructions”.
䡺
Particular attention is to be paid to all
warnings and items of information relating
to safety.
z
Warning!
Any work that may have to be per-
formed on the electrical installation
should be performed by fully quali-
fied technicians only.
Based specifications and
standards:
The devices fulfil the following
specifications and standards:
– EN 61000-6-2:2005 – Generic standards –
Immunity for industrial environments
– EN 55022:2006 + A1:2007 – Information
technology equipment – Radio disturban-
ce characteristics
– EN 60950-1:2006 – Safety of Information
Technology Equipment (ITE)
– EN 61131-2:2007 – Programmable
Controllers
– FCC 47 CFR Part 15:2009 –
Code of Federal Regulations
– cUL 508:1998 – Underwriters Labratories
Inc. Safety for Industrial Control
Equipment.
The device has a certification based on a
specific standard only if the certification
indicator appears on the housing.
7
Notes on CE
identification
The devices comply with the regula-
tions of the following European
directive:
2004/108/EC
Directive of the European Parlia-
ment and of the Council on the
approximation of the laws of the
member states relating to electro-
magnetic compatibility.
The EU declaration of conformity is
kept available for the responsible
authorities in accordance with the
above-mentioned EU directives at:
Hirschmann
Automation and Control GmbH
Stuttgarter Straße 45-51
D-72654 Neckartenzlingen
Tel+49-1805-14-1538
䡺
Relevant for North America:
The subject unit is to be suppplied by a
Class 2 power source complying with the
requirements of the National Electrical
Code, table 11(b). If power is redundant
supplied (two individual power sources) the
power sources together should comply with
the requirements of the National Electrical
Code, table 11 (b).
䡺
Relevant for North America:
Use 60/75°C or 75°C copper(CU)wire only.
Safety Guidelines
Shielding Ground
Note:
The shielding of the twisted pair
wires which can be connected must be
grounded on the plug housing.
䡺
Beware of possible short circuits when
connecting a cable section with conductive
shielding braiding.
Safety Guidelines Housing
z
Warning!
Do not try to open the housing of
the device.
䡺
Make sure that the electrical installation
meets local or nationally applicable safety
regulations.
Open type UL listed product – intended to
be installed in a Type 1 or better enclosure.
Safety Guidelines Environment
z
Warning!
The device may only be operated in
the listed ambient temperature
range.
䡺
The installation location is to be selec-
ted so as to ensure compliance with the cli-
matic limits listed in the Technical Data.
Staff qualification
requirements
Note:
Qualified personnel, as understood
in this manual and in the warning signs, are
persons who are familiar with the setup,
assembly, startup, and operation of this
product and are appropriately qualified for
their job. This includes, for example, those
persons who have been:
– trained or directed or authorized to
switch on and off, to ground and to label
power circuits and devices or systems in
accordance with current safety enginee-
ring standards
– trained or directed in the care and use of
appropriate safety equipment in accor-
dance with the current standards of safety
engineering
– trained in providing first aid.
General Safety Instructions
䡺
This device is electrically operated.
Adhere strictly to the safety requirements
relating to voltages applied to the device as
described in the operating instructions!
The product can be used in the indu-
strial sphere.
– Interference immunity:
EN 61000-6-2:2005
– Radio interference level:
EN 55022:2006 + A1:2007, Class A
z
Warning!
This is a Class A device. This equip-
ment may cause radio interference if
used in a residential area; in this
case it is the operator´s responsibili-
ty to take appropriate measures.
The precondition for compliance
with EMC limit values is strict adhe-
rence to the construction guidelines
specified in this description and
operating instructions.
FCC Note:
This device complies with part 15 of FCC
rules. Operation is subject to the following
two conditions : (1) This device may not
cause harmful interference; (2) this device
must accept any interference received,
including interference that may cause unde-
sired operation.
This equipment has been tested and found
to comply with the limits for a Class A digi-
tal device, persuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio fre-
quency energy and, if not installed and
used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the inter-
ference at his own expense.
,
Recycling Note:
After its use, this product has to be
processed as electronic scrap and
disposed of according to the prevai-
ling waste disposal regulations of
your community, district, country and
state.
