Hirschmann MACH 4000 Series User Manual Download Page 20

Page: 20 / 236

Access to the user interfaces

1.2 Command Line Interface

Basic - L3P

Release 3.1 06/07

Fig. 3:

Logging in to the Command Line Interface program

Enter a username. The state on delivery value for the username is

admin

. Press the Enter key.

Enter the password. The state on delivery value for the password is

private

. Press the Enter key.

You can change the username and the password later in the Com-
mand Line Interface.

Note that these entries are case-sensitive.

The start screen then appears.

PowerMICE Release L3P-01.0.00-K16

(Build date 2005-10-31 19:32)

System Name: PowerMICE

Mgmt-IP : 149.218.112.105

1.Router-IP: 0.0.0.0

Base-MAC : 00:80:63:51:74:00

System Time: 2005-11-01 16:00:59

User:

Summary of Contents for MACH 4000 Series













































































































































































































































Search results

Summary of Contents for MACH 4000 Series

Reviews:

Brands by name

Popular brands

Hirschmann MACH 4000 Series, User Manual

Search results

Summary of Contents for MACH 4000 Series

Reviews:

Brands by name

Popular brands