Hirschmann MACH 4000 Series, User Manual

Page: 156 / 236

Traffic control
156
8.6 VLANs
Basic - L3P
Release 3.1 06/07
8.6.3 Setting up VLANs
V
Select the
Switching:VLAN:Static
dialog.
To set up VLANs, you first specify the desired VLANs in the VLAN static
table:
V
After clicking on “Create”, you enter the appropriate VLAN ID. A new
line appears in the table.
V
Enter the name of your choice for this VLAN.
V
Define the affiliation of the ports you require.
-
not a member of the VLAN.
M
a member of the VLAN - packet is transmitted with tag .
F
not a member of the VLAN even not dynamically via GVRP
U
a member of the VLAN - packet is transmitted without tag.
V
After setting up VLANs, you specify the rules for received data in the
VLAN Port table (port):
D
Port VLAN ID
specifies to which VLAN a received untagged data packet is assi-
gned.
D
Acceptable Frame Types
detemines if data packets can also be received untagged.
D
Ingress Filtering
specifies whether the received tags are evaluated.
D
GVRP status
determines if GVRP data packets are received/transmitted.
enable
: GVRP data packets are received/transmitted, and
thus VLAN information is exchanged with other agents.
disable
: no GVRP data packets are received/transmitted.
The consequence is that no VLAN configuration data is
exchanged between the individual agents.