manualshive.com logo in svg

Hirschmann MACH 4000 Series, User Manual

Share
Download
Hirschmann MACH 4000 Series User Manual Download Page 123

Traffic control

Basic - L3P

Release 3.1 06/07

8.1 Directed frame forwarding

123

The Switch can learn up to 8000 addresses. This becomes necessary if more 
than one terminal device is connected to one or more ports. It is thus possible 
to connect several independent subnetworks to the Switch.

8.1.3 Aging of learned addresses

The Switch monitors the age of the learned addresses. Address entries 
which exceed a certain age (30 seconds, aging time) are deleted by the 
Switch from its address table.
The Switch floods data packets with an unknown target address.

 

The Switch transmits data pakets with known target addresses to specific 
destinations.

Note: 

A reboot deletes the learned address entries.

  

V

Select the 

Switching:Global

 dialog.

V

Enter the Aging Time for all dynamic entries in the range from 10 to 
630 seconds (Unit: 1 second, default setting: 30).

 

In connection with the router redundancy (see MACH 3000), set the 
time greater/equal than 30 seconds.

Summary of Contents for MACH 4000 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands