BAT54-F
Release 12/07
5
Never insert pointed objects (thin screwdrivers, wires, etc.) into the in-
side of the subrack! Failure to observe this point may result in injuries
caused by electric shocks.
Environment
The device may only be operated at the specified maximum ambient tem-
perature and relative air humidity (non-condensing).
Install the device in a location where the climatic threshold values
specified in the technical data are adhered to.
Only to be used in an environment with the contamination level speci-
fied in the technical data.
When installing external antennas, make sure that you adhere to the
regulations of the country in which you are operating the WLAN de-
vice.
In ambient temperatures under -10 °C, use cabling designed for mini-
mum temperatures.
Relevant for use in Ex zone 2 according to ATEX 95 (ATEX 100a)
:
Only products labeled accordingly may be operated in Ex zone 2.
When operating the device in Ex zone 2, the following applies:
II 3G
Ex nA II T4 -20°C ... +60°C
KEMA 07 ATEX 0190
DO NOT OPEN THE DEVICE WHEN IT IS ELECTRICALLY CHARGED.
DO NOT DETACH ANY CONNECTORS WHEN THE DEVICE IS ELEC-
TRICALLY CHARGED.
DO NOT REMOVE THE LABELED HOUSING COVER.
The BAT54-F X2 (FCC) devices are installed with a housing cover - as
mounted in the state on delivery.
Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and oper-
ation of this product and are appropriately qualified for their job. This in-
cludes, for example, those persons who have been:
X
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
Temperature code T4 Ambient –20 °C … +60 °C
List of standards
EN 60079-0: 2006
EN 60079-15: 2005
CLC/TR 50427: Dec. 2004
Summary of Contents for BAT54-F
Page 40: ...40 BAT54 F Release 12 07 ...
Page 42: ......
