26
BAT54-F
Release 12/07
2.2.8
Installing the data lines
10/100 Mbit/s twisted pair connection
10/100 Mbit ports enable the connection of terminal devices or indepen-
dent network segments according to the IEEE 802.3 100BASE-TX /
10BASE-T standard.
These ports support:
X
Autonegotiation
X
Autopolarity
X
Autocrossing (if autonegotiation is activated)
X
100 Mbit/s half duplex mode, 100 Mbit/s full duplex mode
X
10 Mbit/s half duplex mode, 10 Mbit/s full duplex mode
Delivery condition: auto-negotiation activated.
The TP connection is a 4-pin M12 female connector with D coding. On de-
livery, the connection is sealed with a cover cap.
The housing of the M12 socket is electrically connected to the function
ground and to the metal housing of the device. The connection pins are
electrically separated from the function ground and the metal housing.
Figure 6: Pin assignment of a TP/TX interface, M12 socket
Use a shielded CAT5 cable.
Use a shielded 4-pin M12 plug.
Connect the cable shield to the connector housing.
BAT54-F ground connection
Ground conductor
Fixing washers
for ground conductor
Pin
1
2
3
4
Function
TD+
RD+
TD-
RD-
4
1
2
3
Ethernet Port
Summary of Contents for BAT54-F
Page 40: ...40 BAT54 F Release 12 07 ...
Page 42: ......
