Operating Modes
17
6.4
Settings
To get to the settings window, press the Settings icon in the lower right corner of the main measurements
screen, as seen below.
Once in settings, you will have the ability to change the LED color display of the wireless module that you
are connected to, and the SSID display name of the device. When either of these are changed, the app
will need to reboot and reconnect to the wireless module. So after the app closes, it will direct you to the
iPhone WiFi settings, where you can reconnect to the new SSID name or color, and then open the app
again.
The app version, wireless device firmware version, and wireless device serial number are all displayed on
the lower left corner of the settings window. The calibration values are viewable in the center of the
screen, but are factory password protected for editing.
