manualshive.com logo in svg

HIOS PG Series, User Manual

Share
Download
HIOS PG Series User Manual Download Page 17

17

■

Data Taking-in Sheet (HIOS-PG-0611-V2-2_5)

By using the data taking-in sheet in the attached CD-ROM, you can check the OK/NG of screw tightening 
on the PC or record the measurement data.

 CAUTION

◦

Enable macros.

◦

Start settings after turning on PG-01 and connecting it to the PC.

◦

 When using USB, the PC may turn off PG-01 automatically in some cases. In that case, please 
disconnect and reconnect the screwdriver.

◦

There is no reaction to the reverse rotation of the screwdriver.

◦

 If you want to take in two types of data, create two files (for example, test1.xls and test2.xls) in 
advance. Then, start up two applications, and then open each file. 
If you open files by double-clicking them in Windows Explorer, two files are opened in the same 
application and the application cannot be used.

Operating Environment

The data taking-in sheet was confirmed to be effective in the following environments:

・

Microsoft Windows XP

・

Microsoft Excel 2003

If it is not functioning, select application type “screwdriver data collection”.
Please be aware that maintenance and support services are unavailable since this is sample software.

Configuration of the Screen

❶ ❷

❸ ❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❶

Connection confirmation window

Summary of Contents for PG Series

























Reviews:

No comments

Brands by name

Popular brands

Load more brands