Hioki SS7012, Operation Manual

Page: 9 / 20

Response Messages
5
Return Result
After the instrument executes a query command the return of the result will be in
the following format:
< Result ><CR><LF>
The format of measurement data will be shown as following:
<
Measurement Data
><CR><LF>
The format of monitor data will be shown as following:
< Monitor Data ><CR><LF>
The format of setting command will be shown as following:
(Response 1)
OK<CR><LF>
(When the setting command was pro-
cessed normally)
(Response 2)
CMD ERR<CR><LF>
(When there is an error in the transmis-
sion command)
Data Types
Returned message is the ASCII string from the instrument responding to a
query.
A query is a command followed by a question mark.
The following table 2 is explanation for data types.
Response Messages
Table 2: Data Types of Responding Message and Parameter
Data Type Explanation Example
NR1 An integer 0, 1, 2, 3, etc.
NR2 This numeric rep-
resentation has
an explicit radix
point.
+13.234, 400.0, etc.
ASCII ASCII string XXXXXXXXXXXX (device ID etc.)
When key operation is used with the SS7012 and memory write mode or mem-
ory clear mode is enabled, commands are disabled and “
CMD
ERR<CR><LF>
” is returned. Before sending a command, always exit memory
write mode or memory clear mode.
See: Memory write mode

Instruction manual of the
SS7012 (p. 53)
Memory clear mode

Instruction manual of the
SS7012 (p. 61)