Hioki MR8827 Instruction Manual Download Page 25

Page: 25 / 436

Screen Organization

Explanation of Screen Contents

Waveform Screen

Trigger marker

Shows the point where

the trigger event occurred.

(p. 187)

Vertical axis display

Shows the value per increment for each

channel. This is linked to the range

setting. (p. 63)

Scroll bar

Stored waveforms are indicated by red

bars. The displayed waveform is indicated

by a blue frame. (p. 126)

Analog waveform (p. 63)

Logic waveform (p. 66)

Storage counter

Shows how many trigger

events occurred. (p. 69)

Title comment

Shows the specified

title comment.

(p. 140)

Trigger time

Shows the date and

time of the last trigger

event. (p. 187)

Media icon

Shows the media

status. (p. 40)

Current date and time

Shows the internal clock

date and time. (p. 46)

Upper and lower limits

The upper and lower limit

values for each channel are

shown here. (p. 136)

Settings window

Set measurement

conditions as

follows. (p. 52)

Settings cursor

The current

cursor location

flashes.

Elements Common to the Status, Channel, System, and File Screens

Hint

Shows details about the item at the current settings cursor position.

Messages such as “Online,” “Key Lock active.” and error messages

are also shown here.

Sheet tab

Shows names of sheets

that can be selected.

Use the

MENU

keys to

switch between sheets.

Next page

This is displayed if

there are more than

five setting items.

This button brings

up the next group of

items.

Summary of Contents for MR8827




















































































































































































































































































































































































































































Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands

Hioki MR8827, Instruction Manual

Search results

Summary of Contents for MR8827

Reviews:

Related manuals for MR8827

Brands by name

Popular brands