Hioki CT6700, Instruction Manual, Page: 28 / 72

24
Features
1.2 Features
• The sensor head *1 has a clamp design that makes it
possible to easily observe current waveforms while current
continues to flow through the conductor being measured.
• The sensor head features a sliding opening and closing
mechanism *
2
that is easy to operate.
• The terminator’s
*3
output connector can be easily
connected to a waveform measurement instrument simply
by plugging it in
*4
.
• The terminator’s output connector can be connected
when the locking pin on the waveform measurement
instrument’s BNC input connector is in either the horizontal
or vertical orientation
*4
.
• LED warnings are displayed when an overload occurs and
when the sensor head is unlocked.
* 5
• You can observe low-current waveforms at the high
sensitivity of 1 V/A.
*6
• Broadband frequency characteristics *6
CT6700: DC to 50 MHz
CT6701: DC to 120 MHz
• Demagnetization and zero-adjustment functions make it
easy to get ready for measurement. *
7
*1: See “Sensor” (p. 26)
*2: See Procedure 2 (p. 41)
*3: See “Terminator” (p. 25)
*4: See Procedure 3 (p. 39)
*5: See “Key and LEDs” (p. 28)
*6: See “3 Specifications” (p. 45)
*7: See “Performing Demagnetizing and Zero-Adjustment” (p. 37)