Hioki CT6700, Instruction Manual, Page: 45 / 72

41
Performing Measurements
2.3 Performing Measurements
Before performing measurements, be sure to read “Usage
Notes” (p. 5), and “2.1 Inspection Before Use” (p. 33),
and “2.2 Preparation for Measurements” (p. 35) and
perform the described steps.
Procedures
1
Pull the sensor opening
lever, so that the sensor head
opens. Opening
lever
2
Clamp the conductor being
measured.
• Clamp so that the
conductor is in the
center of the sensor
aperture (p. 26).
• Align the sensor so that
the current direction
indication corresponds
to the direction of
current flow through
the conductor to be
measured.
High-
potential side
Low-potential
side (ground
potential side)