Hioki CT6700, Instruction Manual, Page: 39 / 72

35
Preparation for Measurements
2.2 Preparation for Measurements
Before preparation for measurements, be sure to read
“Precautions during preparation for measurements” (p. 7).
Items to be prepared
• Model CT6700 or Model CT6701 Current Probe
• Model 3269 or Model 3272 Power Supply (option)
• Waveform measurement instrument (oscilloscope,
recorder, or etc.)
Connecting the device to the Power Supply
Procedures
1
Verify that the POWER switch on the 3269 or 3272 is in
the OFF position and connect the power cord.
2
To lock the sensor head,
push the opening lever
until the JAW UNLOCKED
indication disappears.
At the moment, do not
clamp the conductor
being measured.