Hioki CLAMP ON LEAK HiTESTER 3283, Instruction Manual

Page: 33 / 64

29
__________________________________________________
Chapter 2 Measurement Procedure
_____________________________________________
MAX
→
MIN
→
AVE
→
instantaneous value
(no indication)
3. During measurement, the MAX/MIN key can
be used to select the value that should be
shown.
MAX : Maximum value is shown.
MIN : Minimum value is shown.
AVE : Average value is shown = (maximum
value + minimum value)/2
If none of the MAX , MIN , or AVE indicators is
shown, the display shows the instantaneous
value.
4. Pressing the HOLD key will stop the recording
function. The HOLD indication appears and the
REC indication stops flashing.
By pressing the MAX/MIN key in this
condition, the MAX , MIN , and AVE values
stored in the internal memory can be called up
on the display, as follows.
While HOLD is shown, the elapsed time is not
incremented. Also if the clamp sensor is
removed from the conductor for easier reading,
the minimum value will not return to zero.
Pressing the HOLD key once more causes the
HOLD indication to go out. The recording
function resumes, and REC flashes again.