Hioki 9333, Instruction Manual

Page: 16 / 56

8
_____________________________________________________________________________________________
2.4 LAN Settings
______________________________________________________________________________________________
This is required for the data collection function.
For details see Section 4.3.5.
Example: 8841/42
NOTE
･ Using the 8841, 8842, 8826, 8835-01 and 8720
If no LAN card is inserted, the Settings screen does not appear, so be sure to
insert the LAN card before making the settings.
For details of the settings, refer to the Instruction Manuals supplied with the 9578
10 BASE-T LAN CARD.
･ Using the MR8827, MR8847A, MR8847, 8847, MR8740, MR8741, 8730, 8731, 8855
For details of the settings, refer to the Instruction Manuals supplied.
Settings on the Memory HiCorder
Carry out the Memory HiCorder settings in the System screen.
Do not change the settings during a communications session.
The settings take effect when you press the Confirm function key. In other
words, do not press Confirm for each individual setting, but only after
completing all the settings.
･ The delimiter and header settings are used for control by GP-IB
commands.
Settings on the computer
Using this software requires the computer to have a LAN connection
installed. For details of the LAN settings, consult the Windows "Help" files,
or the documentation supplied with the computer's LAN card. The TCP/IP
protocol must be available for use.