Hioki 9333, Instruction Manual

Page: 15 / 56

7
_____________________________________________________________________________________________
2.4 LAN Settings
______________________________________________________________________________________________
Of course, if assembling a stand-alone network with no connection to an
existing network, you can still obtain the address information from the
administrator, or if there is no administrator, you can assign the setup values
yourself.
An IP address within the following range is recommended when setting up
such a stand-alone network: 192.168.0.0 to 192.168.255.255.
However, the rightmost number may not be 0 or 255, so we recommend
setting the controller device (PC, etc.) to 192.168.0.1, and setting this unit to
192.168.0.2. If several Memory HiCORDERs are to be connected, the last
number should be incremented by one for each unit (e.g., the next unit
would be 192.168.0.3).
The Host Name should be carefully selected to be unique among the Host
Names assigned to all other devices.
Otherwise, the following settings should be satisfactory:
Subnet Mask : 255.255.255.0
Default Gateway : OFF
Port Number : 880X