Hioki 9333, Instruction Manual, Page: 48 / 56

40
_____________________________________________________________________________________________
5.3 Using the Waveform Viewer
______________________________________________________________________________________________
CH
This indicate the list of channel.
When a check mark is present the corresponding channel is
displayed.
Zoom
Set the magnification on the voltage axis for the specified
channel.
Posn Set the position of the specified channel.
Show Display the specified channel(s).
Hide Do not display the specified channel(s).
Show All Display all channels.
Hide All Do not display all channels.
Color >> Change the color of the specified channel(s).
Default
Set all values of the specified channel(s) back to their default
values.
Close Close the Waveform Control Panel.
Changing waveform scale and position (Waveform Control Panel)
You can adjust the display for each channel separately. In the [View] menu,
select [Waveform Control Panel] to display a dialog box.
Checking the waveform measurement conditions (Properties)
Select [View], then [Properties] from the menu to display the measurement
settings on the MEMORY HiCORDER.
Checking voltage values (Trace)
Select [View], then [Trace] from the menu to check the time value and
difference of the two cursors (A and B) and the voltage values and
differences of all channels.
File list in index file
Select [View], then [Block List] to check the file list (block number,
filename, time axis range, trigger time) in the index file.
Double-click a file in the list opens a new window in which you can check
waveform in that file.
* This is effective only when reading Sequential, Multi-block, REC&MEM
index files.