Hioki 9332, Instruction Manual

Page: 42 / 44

38
_____________________________________________________________________________________________
Chapter 6 Creating and Modifying Setting Files
______________________________________________________________________________________________
Model for which file is being edited
Possible input range
6.3 Details of Settings
Status tab Basic settings, extended settings, sequential save, arithmetic
settings.
Channel tab Analog channel and logic channel settings.
Trigger tab Trigger settings.
Scaling tab Scaling settings.
Comment tab Comment settings.
System tab Environment, printer, screen copy, RS-232C settings.
The RS-232C settings are not applied for communications
when sending setting files.
Fax/Modem tab Fax and modem settings.
The telephone number and AT command can only include
alphanumeric characters.
3. Resaving an existing setting file
Select
File - Save
.
If the file is newly created, the
Save as
dialog box appears.
4. Creating a new setting file
Select
File - New - 8807 Setting File
.
Create a setting file for the model 8807.
Select
File - New - 8808 Setting File
.
Create a setting file for the model 8808.
This displays all of the settings in their default state on the MEMORY
HiCORDER (as after a system reset).
5. Exiting the Settings Editor
Select
File - Exit
.
6. Status bar indications
The settings are the same as on the MEMORY HiCORDER. For details of
individual settings, refer to the Instruction Manual for the MEMORY
HiCORDER.
The MEMORY HiCORDER settings are divided into a number of sheets.
Click the corresponding tab to display a sheet.
The Function setting is independent of the sheets.
Note that some of the settings available on the MEMORY HiCORDER
itself cannot be set with this program (time axis display magnification,
A/B cursors, etc.). For these settings, in the case of a new file, the
MEMORY HiCORDER reverts to the default settings. If the file was first
downloaded from the MEMORY HiCORDER, these settings remain
unchanged.