manualshive.com logo in svg

Hioki 3144-20, Manual, Page: 101 / 118

Share
Download
Hioki 3144-20 Manual Download Page 101

97

Chapter 5 Specifications

Power supply

Communicating functions

Ancillary functions

Environment, standards, and others

Rated voltage

• When using six LR6 alkaline batteries:

1.5 VDC x 6

• When using the 9445-02 AC ADAPTER 

(UL, SA10-9010N, SINO-AMERICAN)
or 9445-03 AC ADAPTER (CEE, SA10-
9010G, SINO-AMERICAN):
9 VDC, 500 mA, from rated supply volt-
age of 100 to 240 VAC(Voltage fluctua-
tions of ±10% from the rated supply
voltage are taken into account.), 50/60
Hz, maximum rated current: 250 mA

Maximum rated 

power

4.0 VA max (9741 included)

Time of continuous 

use

About 5 hours (when using batteries with 

monitoring function, and at ambient tem-

perature of 23°C as reference value)

Description of com-

munication

Data recorded in internal memory of the 

3144-20 is transferred to a PC.

Interface

USB Ver1.1

Battery life warning The 

 mark appears when the supply 

voltage drops below 6.5 V.

Time setting

The year, month, day, hour, minute, and 

second are set by key operation.

Temperature and 

humidity for guaran-

teed accuracy

Guaranteed accura-

cy period

23±5°C (73±9°F), 80%RH or less (non-

condensating)

1 year

Summary of Contents for 3144-20























































































































Reviews:

No comments