Hioki 3144-20, Manual

Page: 53 / 118

49
Chapter 3 Setup and Measurement
Checking peak values and peak detection times
When PEAK HOLD is on, the frequency ranges
can be switched to check the corresponding peak
values and detection times.
Use the
key or key to select the fre-
quency range.
• The indications of peak values and the detection
times cover the time range from the start of
recording to the present time. When the PC soft-
ware is used, the indications of peak values and
detection times cover all recorded data that was
downloaded to the PC. For this reason, if data
was acquired in overwrite recording mode, the
3144-20 and PC software may indicate different
peak values and detection times.
• When there are multiple peak values, the time of
the peak value detected first will be indicated.
Frequency
range
Peak value
Peak detection
time indicated
Date and time are
displayed alternately.