
31
3.5 Connecting to the Measured Line
Connect the sensors and cables to the measured
line according to the connection diagram.
1.
Connect the clamp sensors to the line.
2.
Connect the voltage cables to the line.
❖
❖
Instruction manuals of the clamp sensors
In order to prevent electric shock and short-
circuit accidents, shut off the power to the
line to be measured before connecting the
clamp sensors and voltage cords.
• Avoid stepping on or pinching cables, which
could damage the cable insulation.
• Do not input voltage or current to the U INPUT
terminals and CLAMP SENSOR INPUT
terminals when module power is OFF. This will
avoid damaging the module.
Summary of Contents for 2331-20
