20 Plow Assembly
18. Locate three blue connector splices in the
hardware bag in the plow’s parts box.
DWG NO. 4165
Using a blue splice, crimp the single brown
wire from the underhood harness into the
vehicle’s driver’s side parking light wire.
Using a blue splice, crimp the single yellow
wire from the underhood harness into the
vehicle’s driver’s side turn signal wire.
Using a blue splice, crimp the single green
wire from the underhood harness into the
vehicle’s curbside turn signal wire.
19. Select the proper headlight adapter for your
vehicle, specific instructions are included
with each kit.
The headlight adapter kit consists of two
identical adapters. Install the adapters ac-
cording to the instructions included with the
kit and connect to the 5-pin connectors of
the underhood wiring harness.
20. Secure all cables away from hot or moving
components with cable ties.
This completes the Electrical Installation.
21. At this point, the mount kit should be as-
sembled onto the truck.
Prongs from the truck mount kit should
be at a height that will slightly lift the plow
frame when attaching the plow. Prong re-
ceivers on the plow frame should be paral-
lel to the ground when attaching the plow.
Apply powered graphite on the truck prongs
to help the plow to slide on and off more
easily.
REF.
NO.
PART
NUMBER
DESCRIPTION
QTY. REF.
NO.
PART
NUMBER
DESCRIPTION
QTY.
1
2
3
4
5
25011037
700-10904
951-003-014
950-004-076
392-010-010
Clamp
Machine Screw #6 - 32 X 1”
Locknut #6 - 32 Nylon Insert
Machine Screw #10 - 24 X 1 1/2”
Locknut #10 - 24 Nylon Insert
1
1
5
2
2
6
7
8
9
10
950-004-033
36716025
367-001-011
25010278
36716002
Machine Screw #6 - 32 X 1/2”
Nylon Lanyard 8”
Cable Tie 14”
Plug Mount Plate
Dust Cap
4
1
4
1
2
DWG NO. 3900