HindlePower AT10.1 series, Operating Instructions Manual, Page: 22 / 44

DNP V3.00
20
DNP V3.00
DEVICE PROFILE DOCUMENT
(Also see the Implementation Table in Section 7.3 on page 22.)
Requires Application Layer Confirmation:
Never
Always
7
When reporting Event Data
When sending multi-fragment responses
Sometimes
Configurable
Timeouts while waiting for:
Data Link Confirm: None
7
Fixed at 2000 Variable Configurable.
Complete Appl. Fragment:
7
None Fixed at ____ Variable Configurable
Application Confirm: None
7
Fixed at 2000 Variable Configurable,.
Complete Appl. Response:
7
None Fixed at ____ Variable Configurable
Others:
Inter-character
Timeout:
7
Fixed at 50 ms.
Select/Operate Arm Timeout:
7
Fixed at 5000 ms.
Binary input change scanning period:
7
Fixed at 5000 ms.
Analog input change scanning period:
7
Fixed at 5000 ms.
Unsolicited offline interval:
7
Fixed at 30000 ms if unsolicited messages is off
Configurable if unsolicited messages is on. See setup.
Unsolicited response notification delay:
7
Fixed at 15000 ms.
Delay Measurement:
100 ms.
Synchronization: 1000 ms.
Sends/Executes Control Operations:
WRITE Binary Outputs Never
7
Always Sometimes Configurable
SELECT/OPERATE Never
7
Always Sometimes Configurable
DIRECT OPERATE Never
7
Always Sometimes Configurable
DIRECT OPERATE - NO ACK Never
7
Always Sometimes Configurable
Count > 1
7
Never Always Sometimes Configurable
Pulse On
7
Never Always Sometimes Configurable
Pulse Off
7
Never Always Sometimes Configurable
Latch On Never
7
Always Sometimes Configurable
Latch Off Never Always
7
Sometimes Configurable
Queue
7
Never Always Sometimes Configurable
Clear Queue
7
Never Always Sometimes Configurable
Explanation of Sometimes: See the Binary Outputs point list in Section 7.4.2 on page 26 for a description
of which control operations are supported for each point.