HIMA HIMax X-CPU 01, Manual

Page: 36 / 52

4 Start-up X-CPU 01
Page 36 of 52 HI 801 009 E Rev. 4.00
VLAN (Port-Based VLAN)
For configuring the use of port-based VLAN.
i
Should VLAN be supported, port-based VLAN should be off to enable each port to
communicate with the other switch ports.
For each port on one switch, the user can define which other ports of the switch received
Ethernet frames may be sent to.
The table in the VLAN tab contains entries through which the connection between two ports
can be set as active or inactive.
Default setting: All connection between ports active
LLDP
With LLDP (Link Layer Discovery Protocol), information such as MAC address, device
name, port number is sent per multicast in periodic intervals via the own device and is
received from the neighboring devices.
LLDP uses the following values depending on whether PROFINET is configured on the
communication module.
PROFINET on the COM module ChassisID TTL (Time to Live)
Used Device name 20 s
Not used MAC Address 120 s
Table 21: Values for LLDP
The processor and communication modules support LLDP on the Eth1, Eth2, Eth3 and
Eth4 ports
The following parameters define how a given port should work:
Off LLDP is disabled on this port.
Send LLDP sends LLDP Ethernet frames, received
LLDP Ethernet frames are deleted without being
processed.
Receive LLDP sends no LLDP Ethernet frames, but
received LLDP Ethernet frames are processed.
Send/Receive LLDP sends and processes received LLDP
Ethernet frames.
Default setting: OFF