HIMA HIMatrix F60, Manual

Page: 5 / 114

System Manual Modular Systems Table of Contents
HI 800 191 E Rev. 2.02 Page 5 of 114
7.1.1 Heat Dissipation 48
7.1.1.1 Definitions 48
7.1.1.2 Installation Type 48
7.1.1.3 Natural Convection 49
7.2 Installation and Mounting 49
7.2.1 Mounting 49
7.2.2 Construction Depth 50
7.2.3 Mounting on a Flat Base 51
7.2.4 Mounting and Removing the Modules 51
7.2.5 Connecting the Input and Output Circuits 51
7.2.6 Earthing and Shielding 52
7.2.6.1 Earthing the 24 VDC System Voltage 52
7.2.6.2 Earthing Connections 53
7.2.6.3 Shielding 53
7.2.6.4 EMC Protection 53
7.2.7 Connecting the Supply Voltage 53
7.2.8 Using the Reset Key with the CPU 01 and CPU 03 Modules 54
7.3 Configuration with SILworX - CPU OS V7 and Higher 54
7.3.1 Configuring the Resource 54
7.3.1.1 Resource Properties 55
7.3.1.2 Parameters for the Remote I/Os 58
7.3.1.3 Hardware System Variables for Setting the Parameters 58
7.3.1.4 Hardware System Variables for Reading the Parameters 59
7.3.1.5 Rack System Parameter Settings 62
7.3.2 Configuring the Ethernet Interfaces 62
7.3.3 Configuring the User Program 62
7.3.4 Configuring the Inputs and Outputs 63
7.3.5 Configure Line Control 65
7.3.5.1 Required Variables 65
7.3.5.2 Configuring Pulsed Outputs 66
7.3.5.3 Configuration Example with SILworX 67
7.3.6 Generating the Resource Configuration 68
7.3.7 Configuring the System ID and the Connection Parameters 68
7.3.8 Loading a Resource Configuration after a Reset 69
7.3.9 Loading a Resource Configuration from the PADT 69
7.3.10 Loading a Resource Configuration from the Flash Memory of the Communication
System
70
7.3.11 Cleaning up a Resource Configuration in the Flash Memory of the Communication
System
70
7.3.12 Setting the Date and the Time 70
7.4 User Management in SILworX - CPU OS V7 and Higher 71
7.4.1 User Management for SILworX Projects 71
7.4.2 User Management for the Controller 71
7.4.3 Setting up User Accounts 73
7.5 Configuration with SILworX - CPU OS V7 and Higher 74
7.5.1 Configuring the Ethernet Interfaces 74
7.6 Configuring Alarms and Events - with CPU 03 75
7.7 Configuring a Resource Using ELOP II Factory - CPU OS up to V7 78
7.7.1 Configuring the Resource 78
7.7.2 Configuring the User Program 79
7.7.3 Configuring the Inputs and Outputs 81