HIMA HIMatrix CIO 2/4 01, Manual

Page: 20 / 40

4 Start-Up CIO 2/4 01
Page 20 of 40 HI 800 199 E Rev. 1.00
The counters are connected to the following terminals:
Terminal Designation Function
01 C- Common ground
02 A1 Input A1 orbit 1
03 B1 Input B1 or bit 2
04 Z1 Input Z1 or bit 3
05 C1 Input C1 or bit 4
06 C- Common ground
07 C- Common ground
08 C- Common ground
09 C- Common ground
Terminal Designation Function
10 C- Common ground
11 A2 Input A2 or bit 1
12 B2 Input B2 or bit 2
13 Z2 Input Z2 or bit 3
14 C2 Input C2 or bit 4
15 C- Common ground
16 C- Common ground
17 C- Common ground
18 C- Common ground
Table 13: Terminal Assignment for the Counters
Inputs that are not being used need not be terminated.
4.1.3 Connecting the Digital Outputs
The use of shielded cables for the outputs is not mandatory, but improves the EMC
conditions significantly. To allow the connection of the clamps to the the earth grid of the
F60, the diameter of the shielded cables should not exceed 12 mm.
Use the following terminals to connect the digital outputs:
Terminal Designation Function
19 L- Common ground
20 1 Digital output 1
21 2 Digital output 2
22 3 Digital output 3
23 4 Digital output 4
24 L- Common ground
25 L- Common ground
26 L- Common ground
27 L- Common ground
Table 14: Terminal Assignment for the Digital Outputs