HIMA HIMatrix CIO 2/4 01, Manual

Page: 12 / 40

3 Product Description CIO 2/4 01
Page 12 of 40 HI 800 199 E Rev. 1.00
3.1.2.1 Reaction in the Event of a Fault
If the module detects a fault in the counter section, a status bit is set for evaluation in the
user program.
In all these cases, the module activates the
ERR
LED.
In addition to the status bit, the user program must also consider the corresponding error
code.
The error code allows the user to configure additional fault reactions in the user program.
3.2 Equipment, Scope of Delivery
The following list specifies the available components and the corresponding part numbers:
Designation Description Part no.
CIO 2/4 01 Plug-in module, analog outputs, SIL 3/Cat. 4 98 2200099
Table 4: Part Numbers
3.3 Type Label
The type plate contains the following details:
ƒ Product name
ƒ Bar code (1D or 2D code)
ƒ Part no.
ƒ Production year
ƒ Hardware revision index (HW Rev.)
ƒ Firmware revision index (FW Rev.)
ƒ Operating voltage
ƒ Mark of conformity
Figure 1: Sample Type Label