32
33
2.3.2
Volumetric detectors / Antitearing protection tamper
Installation
2.3.3
Reed contacts
ATTENTION!
The PROTEC5X does’nt allow the direct connection with ‘switch’ contacts for
rolling shutters type C778, becouse this central unit is not equipped with impulse
counter.
Use the SCHSW impulse counter board to connect the C778 ‘switch’ contact for rolling
shutters, or use the C800 ‘switch’ contact with integrated impulse counter to connect directly on
the central unit terminal board.
PROTEC5X - User’s manual
In series to
the 24h line
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
4S
4S
C451
Long wires
Long wires
Short wires
Short wires
C401/P
In series to
the 24h line
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
PG12
2B4
ANTITEARING PROTECTION TAMPER
screw +
anchor
ANTITEARING
TAMPER
2 screw
for fixing
on base
Plastic
support
6mm hole for antitearing tamper
!
Perform a 6mm hole and insert the plug supplied. .
!
Tighten the screw until the boss useful. It will
activate the tamper on the back of the central series
PROTEC
Installation tamper on PROTEC base
!
Insert into the hole in the plastic support provided.
!
Plug the cable to the card.
!
Secure with 2 screws the tamper base of
the plant, making sure that the tamper spring going
to fit into the plastic base.
Connecting to tamper central
!
The tamper should be connected to the terminal on
the 24H of the plant, using the supplied cable.
security
security
