background image

Unirac Inc. makes no warranty of any kind with regard 

to this material, including, but not limited to, the 

implied warranties of merchantability and fitness for a 

particular purpose.

The information in this document is subject to change

without notice.

Unirac shall not be liable for errors contained herein or 

for incidental or consequential damages in connection 

with the furnishing, performance, or use of this 

material.

This document contains proprietary information that 

is protected by copyright. All rights are reserved. 

No part of this document may be photocopied, 

reproduced, or translated to another language 

without the prior written consent of Unirac.

Unirac Inc.

Marketing Department

1411 Broadway Boulevard, NE

Albuquerque, NM 87102-1545

© Unirac Inc., 2011. All rights reserved.
SOLARMOUNT-I

 is a trademark of Unirac Inc. in the 

United States of America and other countries.

SOLARMOUNT-I™

Thank you for choosing SolarMount-I™.

This quick start guide provides easy step-by-step 

installation instructions. For additional information, 

please visit us at

 

www.unirac.com

.

BEFORE YOU BEGIN

1 Verify that all of the components are included and 

consistent with your order.

2 To avoid conflicts, never modify or combine Unirac’s 

SolarMount-I™ with components that are not made 

for SolarMount-I. Doing so will void any warranty 

associated with SolarMount-I.

IMPORTANT!

INTRODUCTION

Summary of Contents for UNIRAC SolarMount-I











Reviews: