![Hilti NURON SCO 6-22 Operating Instructions Manual Download Page 21](http://html1.mh-extra.com/html/hilti/nuron-sco-6-22/nuron-sco-6-22_operating-instructions-manual_2136148021.webp)
*2264442*
2264442
English 15
2. Use both hands to hold the product firmly when working.
▶
The product can become unstable if you attempt to hold it with only
one hand or pressed against a part of the body and this can result in
loss of control.
6.3 Operation
1. Hold the product firmly without the tool bit contacting the working
surface.
2. Switch on. → page 14
3. Guide the accessory tool straight into the material in which the cut-out is
to be made, until the depth gauge is in contact with the working surface.
4. Applying steady pressure, advance the accessory tool.
6.4 Switching off
▶
Release the on/off switch.
▶
The switch-on interlock jumps automatically into the locked position.
7
Care and maintenance
WARNING
Risk of injury with battery inserted
!
▶
Always remove the battery before carrying out care and maintenance
tasks!
Care of the product
• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.
Care of the Liion batteries
• Never use a battery with clogged air vents. Clean the air vents carefully
using a dry, soft brush.
• Avoid unnecessary exposure of the battery to dust and dirt. Never
expose the battery to high levels of moisture (e.g. by being dipped in
water or left in the rain).
If a battery has been soaked by moisture, treat it as a damaged battery.
Isolate it in a non-flammable container and consult
Hilti
Service.
• Keep the battery free of extraneous oil and grease. Do not permit dust
or dirt to accumulate unnecessarily on the battery. Clean the battery
with a dry, soft brush or a clean, dry cloth. Do not use cleaning agents
containing silicone as these can attack the plastic parts.
Do not touch the contacts of the battery and do not remove the factory-
applied grease from the contacts.
Summary of Contents for NURON SCO 6-22
