Hilti NURON SCO 6-22, Operating Instructions Manual

Page: 14 / 84

8 English 2264442
*2264442*
▶
Wear protective gloves when changing the accessory tool. Touching the
accessory tool can result in cuts and burns.
▶
Make sure that the accessory tools used have a mounting system
compatible with the product and that they are correctly engaged in the
chuck.
▶
Before switching on the product, check that the collet is fitted and that
the clamping nut is tightened.
▶
Use both hands to hold the product firmly by the insulated grip surfaces.
Keep the grip surfaces dry and clean.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked
air vents!
▶
Do not touch rotating parts – risk of injury!
▶
Do not look directly into the light source (LED) of the product and do not
aim the beam at other persons’ faces. Risk of dazzling or eye damage.
▶
Never touch the clamping nut or collet when the accessory tool gets
stuck and stalls.
▶
Take frequent breaks and do physical exercises to improve the blood
circulation in your fingers. High vibration during long periods of work can
lead to disorders of the blood vessels and nervous system in the fingers,
hands and wrists.
▶
Immediately switch off the power tool if the accessory tool jams. The
product might twist off-line.
▶
Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Product overview 1
@
Vacuum cleaner hose connec-
tor (accessory)
;
LED lights
=
Depth gauge
%
Securing screw
&
On/off switch
(
Switch-on interlock
)
Tool bit
+
Collet
§
Clamping nut
/
Insulated grip surface
:
Spindle lockbutton
∙
Insulated grip surface
$
Air vents
£
Battery
|
Release button, battery
¡
Battery status indicator
Q
Installation opening for acces-
sories
3.2 Intended use
The product described is a hand-held cordless cut-out tool. It is designed for
making cut-outs in drywall board, gypsum fiber board, composite materials
and wood or wood-like materials.