![background image](http://html1.mh-extra.com/html/hilti/nuron-bx-3-22/nuron-bx-3-22_manual_2135927022.webp)
16
English
2268214
*2268214*
Trouble or fault
Possible cause
Action to be taken
The spring element is not
tensioned, status indicator
flashes green.
The battery is empty.
▶
Change the battery.
The fastener guide cannot be
pressed in and status indica-
tor shows
blue
.
The magazine is empty.
▶
For magazine operation, load
the magazine. → page 11
The fastener guide cannot be
pressed in and status indica-
tor shows
green
.
The nail pusher is jammed.
▶
Remove the nail strips from
the magazine and clean the
magazine.
Nail jammed in the fastener guide.
▶
Release the jammed nail.
There is a delay before the
spring mechanism is ten-
sioned, the status indicator
flashes blue and a signal tone
is emitted simultaneously; the
status indicator then lights
blue for 6 minutes.
The magazine is empty.
▶
For magazine operation, load
the magazine. → page 11
The spring element is not re-
tensioned and status indica-
tor flashes yellow.
The fastening tool has overheated.
▶
Allow the fastening tool to cool
down.
Battery temperature too high.
▶
Allow the battery to cool down.
Battery temperature too low.
▶
Allow the battery to warm up
slowly to room temperature.
The spring element is not ten-
sioned and the status indica-
tor flashes red.
The fastener guide is not fitted
correctly.
▶
Insert the fastener guide.
The spring element is not ten-
sioned and the status indica-
tor lights red.
System fault.
▶
Contact
Hilti
Service.
The spring element is not ten-
sioned; no status indication.
The battery is empty.
▶
Change the battery.
The battery is not fitted correctly.
▶
Remove and then correctly
reinsert the battery. → page 10
Deep discharge protection is ac-
tive.
▶
Remove and then reinsert the
battery.
The fastener guide is jammed
in the pressed-in state.
Dirt between the fastener guide
and the nosepiece.
▶
Clean the inside of the nose-
piece. → page 15
10
Disposal
WARNING
Risk of injury due to incorrect disposal!
Health hazards due to escaping gases or liquids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your
Hilti Store
, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti sales representative for further information.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
Summary of Contents for NURON BX 3-22
