Hilti Nuron AG 6D-22-125, Operating Instructions Manual, Page: 41 / 404

*2233921*
2233921 English 33
Item Equipment AC-D AP-D AG-D
AF-D
AN-D
DG-CW
(SPX⁄SP⁄P)
DC-TP
DC-D
(SPX⁄SP⁄P)
3CS⁄4CS
3SS⁄4SS
DD-M14
M
Support plate
(abrasive resin-fiber
disc)
— ✓ — — — —
5 Technical data
5.1 Product properties
Weight in accordance with EPTA Procedure 01, without battery 2.0 kg
Rated voltage 21.6 V
Rated speed 8,500 /min
Maximum wheel diameter
125 mm
Drive spindle thread M14
Spindle length 22 mm
Maximum core bit diameter 125 mm
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 70 ℃
5.2 Battery
Battery operating voltage 21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 40 ℃
Battery charging starting temperature −10 ℃ … 45 ℃
5.3 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Emission sound pressure level (L
pA
) 83 dB(A)
Uncertainty for the sound pressure level (K
pA
) 3 dB(A)
Sound power level (L
WA
)
94 dB(A)
Uncertainty for the sound power level (K
WA
) 3 dB(A)
Vibration information
Other applications, such as cutting, may produce vibration values that deviate from the given values.
AG 6D-22-125
Surface grinding with the vibration-absorbing side handle
(a
h,AG
)
B 22­55 4.2 m/s²
B 22­255 6.4 m/s²
Sanding with sandpaper with the vibration-absorbing side
handle (a
h,DS
)
B 22­55 2.7 m/s²