Hilti Hit-hY 70, Manual, Page: 9 / 11

Adhesive Anchoring Systems
3.2.6 HIT-HY 70 Hybrid for Masonry Construction
222 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2016
Table 15 - Gel and full-cure time in masonry
6 h
4 h
2.5 h
1.5 h
30 min
20 min
4 h
2.5 h
1.5 h
30 min
20 min 10 min
7 min
4 min
2 min
1 min 5
6 ... 10
11 ... 20
21 ... 30
31 ... 40
41
42 – 50
51 – 68
69 – 86
87 – 104
10 min
10 min
7 min
4 min
2 min
1 min 23 – 32
33 – 41
42 – 50
51 – 68
69 – 86
87 – 104 -5 ... 0
1 ... 5
6 ... 10
11 ... 20
21 ... 30
31 ... 40
Table 16 - Gel and full-cure time in brick
6 h
4 h
2.5 h
1.5 h
30 min
20 min
4 h
2.5 h
1.5 h
30 min
20 min 10 min
7 min
4 min
2 min
1 min 5
6 ... 10
11 ... 20
21 ... 30
31 ... 40
41
42 – 50
51 – 68
69 – 86
87 – 104
10 min
10 min
7 min
4 min
2 min
1 min 23 – 32
33 – 41
42 – 50
51 – 68
69 – 86
87 – 104 -5 ... 0
1 ... 5
6 ... 10
11 ... 20
21 ... 30
31 ... 40
3.2.6.4 Installation instructions
Installation Instructions For Use (IFU) are included with each product package. They can also be viewed or downloaded online
at www.us.hilti.com (US) and www.hilti.ca (Canada). Because of the possibility of changes, always verify that downloaded IFU
are current when used. Proper installation is critical to achieve full performance. Training is available on request. Contact Hilti
Technical Services for applications and conditions not addressed in the IFU.
Figure 12 — Influence of in-service temperature on bond strength
Base material temperature, °F
% of Allowable load bond values @ 70 °F
100% 100% 98%
80%
74%
56%