manualshive.com logo in svg

Hilti Hit-hY 70, Manual, Page: 10 / 11

Share
Download
Hilti Hit-hY 70 Manual Download Page 10

Adhesive Anchoring Systems

HIT-HY 70 Hybrid for Masonry Construction 3.2.6

3.2.6

Hilti, Inc. (US) 1-800-879-8000  |  www.us.hilti.com  I  en español 1-800-879-5000  I  Hilti (Canada) Corp. 1-800-363-4458  I  www.hilti.ca  I  Anchor Fastening Technical Guide 2016   223   

Description

Package Contents

Qty of Foil 

Packs

HIT-HY 70 (11.1 fl oz/330 ml)

Includes (1) foil pack with (1) mixer and 3/8-in. filler tube per pack

1

HIT-HY 70  Master Carton  

(11.1 fl oz/330 ml)

Includes (1) master carton containing (25) foil packs with (1) mixer and 3/8-in. filler tube per pack

25

HIT-HY 70 Combo (11.1 oz/330ml)

Includes (1) master carton containing (20) foil packs with (1) mixer and 3/8-in. filler tube per pack and (1) 

HDM 500 manual dispenser

25

HIT-HY 70 Master Carton  

(16.9 fl oz/500 ml)

Includes (1) master carton containing (20) foil packs with (1) mixer and 3/8-in. filler tube per pack

20

HIT-HY 70 Combo (16.9 fl oz/500 ml)

Includes 2 master cartons containing (20) foil packs each with (1) mixer and 3/8-in. filler tube per pack 

and (1) HDM 500 manual dispenser

40

HIT-RE-M Static Mixer

For use with HIT-HY 70 cartridges

1

Brick with holes and hollow concrete block

Threaded Rod 

Mesh Sleeve

Approximate fastenings per foil pack

1

Rod Size 5.8 Grade

Embedment, in.

Qty

Nominal Bit Dia., in.

Mesh Sleeve per Fastening

11.1 fl oz (330 ml)

16.9 fl oz (500 ml)

Plastic Sleeve (for #14 screw)

2

20

1/2

(1) HIT S-12/I

25

40 

HAS B 1/4 x 3  

2

20

1/2

(1) SC 12x50

25

40

HAS B 1/4 x 4-1/2  

3-1/8

20

1/2

(1) SC 12x85

16

26

HAS B 5/16 x 3  

2

20

5/8

(1) SC 16x50

16

26

HAS B 5/16 x 4-1/2  

3-1/8

20

5/8

(1) SC 16x85

7

12

HAS-E 3/8 x 3

2

10

5/8

(1) SC 16x50

16

26 

HAS-E 3/8 x 4-3/8

3-1/8

10

5/8

(1) SC 16x85

7

12 

HAS-E 1/2 x 3-1/8

2

10

11/16

(1) SC 18x50

9

15 

HAS-E 1/2 x 4-1/2

3-1/8

10

11/16

(1) SC 18x85

4

7

Customize the sleeve to the 
length of your application.  

Different embedment depths 

are created with minimal effort.

Step 1: Remove the centering ring of 

any screen tube within the cell. 

Step 2: Pierce the tip of the screen tube 

with the rod intended to be use to check 

embedment depth. 

Step 3: Combine screen tubes to 

desired length.

3.2.6.5 Ordering information

HIT-IC Internally Threaded Insert

Bent Threaded Rod 22.5 degrees

 

with Nut and Washer

HAS-E Threaded Rod with 

 

Nut and Washer 

Reinforcing Bar/Rebar supplied by contractor

HIT-HY 70  

(16.9 fl oz/500 ml)

Mixing Nozzle

Adhesive Pack 

Holder

HIT-HY 70  

(11.1 fl oz/330 ml)

HDE 500 

 

Battery 

Dispenser

HDM 500

 

Manual

Dispenser

Summary of Contents for Hit-hY 70












Reviews:

No comments