Hilti GX-IE, Operating Instructions Manual

Page: 11 / 80

*2208859*
2208859 English 7
3.9 Indication of battery charge status
After pressing a battery release button, the display shows the status of the battery and the fastening tool.
Status Meaning
All four LEDs light green. Charge status is 75 % to 100 %.
Three LEDs light green. Charge status is 50 % to 75 %.
Two LEDs light green. Charge status is 25 % to 50 %.
One LED lights green. Charge status is 10 % to 25 %.
One LED blinks green. • Charge status is below 10 %.
• The fastening tool is overloaded or overheated
and thus not ready for operation.
4 Technical data
4.1 Fastening tool
GX 2-IE GX 2-IE XL
Weight (empty) 3.3 kg 3.4 kg
Length (fastening tool)
500 mm 550 mm
Application temperature, ambient temperature −10 ℃ … 45 ℃ −10 ℃ … 45 ℃
Maximum length (fastener) 150 mm 200 mm
Fastener diameter (steel stud application) 50 mm / 60 mm
with 3.35 mm nail
50 mm / 60 mm
with 3.35 mm nail
Fastener diameter (concrete application) 60 mm / 90 mm
with 3.15 mm nail
60 mm / 90 mm
with 3.15 mm nail
Compression stroke 20 mm 20 mm
Maximum fastener driving frequency (Fasteners per hour) 800 800
4.2 Bluetooth
Maximum magnetic field strength −7.6 dBµA/m
Frequency 13,553 MHz … 13,567 MHz
4.3 Noise information and vibration values
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one fastening tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the fastening
tool. However, if the fastening tool is used for different applications, with different accessories or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
estimation of the level of exposure should also take into account the periods of time when the tool is not
actually in use. This may significantly reduce exposure over the total working period. Prescribe additional
safety measures to protect the operator from the effects of noise and/or vibration, such as: maintenance of
the direct fastening tool and its additional equipment or accessories, keeping the hands warm, organization
of work patterns.
Noise emission values determined in accordance with EN 15895
GX 2-IE GX 2-IE XL
Emission sound pressure level at the workplace (L
pA, 1s
) 100 dB(A) 100 dB(A)
Peak sound pressure level at the workplace (L
pC, peak
) 133 dB(C) 133 dB(C)
Sound (power) level (L
WA, 1s
) 104 dB(A) 104 dB(A)
Uncertainty (sound level) 2 dB(A) / 2 dB(C) 2 dB(A) / 2 dB(C)