![background image](http://html1.mh-extra.com/html/hilti/dx-e-72/dx-e-72_operating-instructions-manual_2136112036.webp)
14 Confirmation of CIP testing
The following applies to C.I.P. member states outside
the EU and EFTA judicial area: The Hilti DX E-72 has
been system and type tested. As a result, the tool bears
the rectangular PTB approval mark showing approval
number S 832. Hilti thus guarantees compliance with the
approved type. Unacceptable defects or deficiencies,
etc. determined during use of the tool must be repor-
ted to the person responsible at the approval authority
(PTB) and to the Office of the Permanent International
Commission (C.I.P.).
15 Health and safety of the operator
15.1 Noise information
Powder-actuated fastening tool
Type
DX E‑72
Model
Series
Caliber
5.6/16 yellow
Power regulation
The tool has no power regulation feature.
Application
Fastening 20 mm laminated wood to concrete (C40)
with the X-U47 P8
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
1
115 dB (A)
Emission noise-pressure level in the work station,
L
pA, 1s
2
107 dB (A)
Peak sound pressure emission level, L
pC, peak
3
141 dB (C)
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Operation and set-up conditions:
Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the
semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure:
Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
NOTE The noise emissions measured and the associated measurement uncertainty represent the upper limit for the
noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
15.2 Vibration
Total vibration in accordance with 2006/42/EC does not
exceed 2.5 m/s².
Further information about user health and safety can be
found at www.hilti.com/hse.
en
31
Printed: 14.04.2014 | Doc-Nr: PUB / 5069866 / 000 / 03
Summary of Contents for DX E?72
Page 2: ...껻 꼃 꼄 껿 꼂 꼁 꼀 껽 껾 껼 1 Printed 14 04 2014 Doc Nr PUB 5069866 000 03 ...
Page 3: ...2 3 8 5 4 9 7 6 Printed 14 04 2014 Doc Nr PUB 5069866 000 03 ...
Page 4: ...10 11 12 13 14 15 Printed 14 04 2014 Doc Nr PUB 5069866 000 03 ...
Page 5: ...16 18 17 Printed 14 04 2014 Doc Nr PUB 5069866 000 03 ...