![background image](http://html1.mh-extra.com/html/hilti/dx-460-gr/dx-460-gr_operating-instructions-manual_2136085017.webp)
12
en
Stud head penetrates through
material fastened
Stud breaks
■
Driving power too low
■
Application limit exceeded
(very hard surface)
■
Driving power too high
■
Try higher power setting or
heavier cartridge
■
Switch to more powerful system
like DX 76 PTR
■
Where permissible for the
application: predrill or change to
a different system (X-BT)
(please contact your Hilti sales
representative for further infor-
mation)
■
Reduce power setting
■
Use lighter cartridge
Fault
Cause
Possible remedies
10. Disposal
Most of the materials from which Hilti power actuated tools are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrange-
ments for taking back your old powder actuated tools for recycling. Please ask your Hilti customer service
department or Hilti sales representative for further information.
Should you wish to return the power actuated tool yourself to a disposal facility for recycling, proceed as fol-
lows: Dismantle the tools as far as possible without the need for special tools.
Separate the individual parts as follows:
Part / assembly
Main material
Recycling
Toolbox
Plastic
Plastics recycling
Outer casing
Plastic / synthetic rubber
Plastics recycling
Screws, small parts
Steel
Scrap metal
Used cartridge strip
Plastic / steel
According to local regulations
O.K.
Printed: 12.08.2013 | Doc-Nr: PUB / 5069839 / 000 / 02