Hilti DD 150-U, Manual

Page: 40 / 534

32 English 434949
*434949*
DD 150-U
Dimensions, diamond core drilling machine (L×W×H) 516 mm x 129 mm x 159 mm
Dimensions, drill stand (L×W×H) 610 mm x 250 mm x 952 mm
Permissible water supply pressure ≤ 6 bar
Rated speed under no load 1st gear
840 /min
2nd gear 1,640 /min
3rd gear 3,070 /min
Protection class Protection class I (earthed)
4.2 Ideal distance of the mark from the hole center
Anchor base plate 270 mm
Vacuum base plate 290 mm
Combination base plate 290 mm
4.3 Rated voltage
The product is available with various voltage ratings. Please refer to your product's type identification
plate for details of its voltage and input power ratings.
Rated voltage 100 V 110 V
GB
110 V
TW
120 V 127 V 220 V 230 V 240 V
Rated current
input
15 A 16 A 15 A 19.5 A 18.5 A 10 A 10.3 A 9.9 A
AC frequency 50/60 Hz 50/60 Hz 50/60 Hz 60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
4.4 Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate gauge.
Recommended minimum conductor cross-sections and maximum power cord lengths:
Conductor cross-
section →
↓ Mains (AC) voltage 1.5 mm² 2.5 mm² 3.5 mm² 4.0 mm²
100 V Not
recommended
Not
recommended
25 m Not
recommended
110 V Not
recommended
15 m Not
recommended
30 m
127 V Not
recommended
20 m Not
recommended
35 m
220 V 35 m 65 m Not
recommended
105 m
230 V 40 m 70 m Not
recommended
110 m
240 V 40 m 70 m Not
recommended
110 m
4.5 Core bit diameter
Use of the water collection system in combination with a wet-type industrial vacuum extractor is
mandatory for upward wet drilling.
Printed: 09.08.2019 | Doc-Nr: PUB / 5069546 / 000 / 09