Hilti DD 150-U, Manual

Page: 34 / 534

26 English 434949
*434949*
1.4 Information notices
On the drill stand, base plate and diamond core drilling machine
On the drill stand and the vacuum base plate
Top
: An additional means of securing the drill stand must be employed
when the machine is used for horizontal drilling with the vacuum securing
method.
Bottom : Use of the vacuum securing method for overhead drilling with the
drill stand is not permissible.
On the diamond core drilling machine
Use of the water collection system in combination with a wet-type industrial
vacuum extractor is mandatory for upward wet drilling.
1.5 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Diamond core drilling machine DD 150-U
Generation: 02
Serial no.:
1.6 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety
2.1 General power tool safety warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
Printed: 09.08.2019 | Doc-Nr: PUB / 5069546 / 000 / 09